maker movement

What if Makers were Singers? 3 min read

• Technology

What if Makers were Singers?

2016 May 18

(The original Chinese version of this post was written by Mr. Owen Ou and published on MakerPRO)  We all know that it is often a... Read More

The Arduino Phenomenon: What is Next for the Popular Board? 3 min read

• Technology

The Arduino Phenomenon: What is Next for the Popular Board?

2016 April 20

The original Chinese version of this article is written by Mr. Hsiang-Yang Lu and published on MakerPRO and CTIMES.  Ever since Intel released Galileo, a... Read More

4/11 – 4/15 Weekly Recap Part 1 3 min read

• Archive

4/11 – 4/15 Weekly Recap Part 1

2016 April 16

As always, our weekly recap is back for the weekend. TechDesign runs these round-up pieces to help those of you who may have missed our... Read More

Introducing Mkr1000 Wifi Outlet: Make Yourself a Smart Socket 2 min read

• Technology

Introducing Mkr1000 Wifi Outlet: Make Yourself a Smart Socket

2016 April 13

Home automation has been dominating the headline of tech news in the past few years, and its popularity also helps to open up the door... Read More

4/4 – 4/8 Weekly Recap Part 2 2 min read

• Archive

4/4 – 4/8 Weekly Recap Part 2

2016 April 10

TechDesign is  back with the other two posts of the week. In Part 1 of the weekly recap, we featured a voice-controlled drone from our partner... Read More

4/4 – 4/8 Weekly Recap Part 1 2 min read

• Archive

4/4 – 4/8 Weekly Recap Part 1

2016 April 9

As the first week of April soon comes to an end, TechDesign has also prepared our first weekly recap of the month for all of... Read More

Getting to Know MakerPRO Part 2: Vision and Future Plans 6 min read

• Archive

Getting to Know MakerPRO Part 2: Vision and Future Plans

2016 April 8

Continuing with our interview with MakerPRO‘s co-founder, Owen Ou, TechDesign will share his vision and future plan for Taiwan’s maker movement and maker economy with all... Read More

Getting to Know MakerPRO Part 1: How Does Everything Start? 3 min read

• Archive

Getting to Know MakerPRO Part 1: How Does Everything Start?

2016 April 7

Last week, TechDesign shared our takeaways from a seminar on PLM for startups and makers with all of you. If you still remember, the organization behind... Read More

Raspberry Pi Based Wireless FM Microphone: A DIY Maker Project 3 min read

• Technology

Raspberry Pi Based Wireless FM Microphone: A DIY Maker Project

2016 March 31

If you still remember, TechDesign introduced a wireless microphone solution from our partner at Nuvoton Technology back in January. The design relies on the high-performance microcontroller from... Read More

Converse Beacon: Prototype Your Own Weather-Forecasting Sneakers 3 min read

• Technology

Converse Beacon: Prototype Your Own Weather-Forecasting Sneakers

2016 February 29

If you have been a regular visitor of the TechDesign blog, you may have noticed a particular section on our blog titled “Raw Tech.”  What... Read More